Road and Rail Inspectorate

As a result of scanning roads and railways with a georadar, radarograms are obtained. According to radarogram data, the interpreter of the georadar data determines the boundaries of the bottom (base) and the state of the groundwater level.

INSPECTION OF MOTOR VEHICLES AND RAILWAYS

Determination of communications

Search for hidden objects

MONITORING OF REINFORCED CONCRETE

Archaeological investigation

HORIZONTALLY DIRECTED DRILLING

Geological surveys

Ecological assessment

Road and Rail Inspectorate

Research of existing road structures

Assessment of the condition of road structures and clarification of the causes of damage to road sections;

Determination of the thickness of the old screed;

Assessment of the water permeability condition of structures and clarification of pipeline sites;

Assessment of road supporting structures based on the determination of the thickness of the layers and the humidity of the ground cover;

Monitoring of changes in the condition of road structures;

Determination of the thickness of the ice on technological roads and the thickness of the freezing layer on roads in winter;

ROAD RESEARCH AND DESIGN

Study of ground and hydrogeological conditions in the track strip;

Determination of groundwater level;

Assessment of the contours and depth of the watershed bed near the bridges;

Study of the place of placement of engineering communications;

Research and assessment of stocks of road building materials in quarries, etc.

QUALITY CONTROL DURING THE PERFORMANCE OF CONSTRUCTION, RECONSTRUCTION AND REPAIR WORKS OF MOTORWAYS

Evaluation of the quality of the creation of the earth’s surface;

Assessment of the thickness of the newly constructed road surface layers;

Evaluation of the sealing quality and humidity of the laid materials.

If the road surface has obvious defects, then you no longer need to use the georadar – it’s time to start replacing the pavement. As a preventive measure, an expert examination should be carried out with the help of a georadar. In this case, the georadar will not only protect the road from complete wear and tear, but also save funds for its restoration.

Against the background of research with a georadar, the design thicknesses of the constructive layers of the road surface are often not observed. In addition, where the design thickness of the base layer is not observed, the thickness of the screed is increased during later repairs.

WITH THE HELP OF A GEORADAR, IT IS ALSO POSSIBLE TO DETECT SUCH DEFECTS OF THE ROAD SURFACE

Zones of soil settling and decrease in the density of the bottom, deformations of the coast;

Surface and groundwater infiltration zones;

Heterogeneous, dusty bottom areas;

The spatial arrangement of the base of the cage layer;

Very wet and washed out areas at the bottom base.

Summing up the above about the georadar, let us note that at the moment the most accurate data on the state of the road surface can be obtained using an economical, safe, reliable and non-destructive assessment method in which the georadar is used.

EXAMPLES OF WORK DONE

EQUIPMENT AND SOFTWARE

3Dscan is the largest “park” of professional technical equipment and software for 3D scanning and geophysical research in the Baltic States. Depending on the task, our certified team of specialists will determine the necessary equipment to achieve the best result.

  • All-in-one specialized GPR system capable of exploring large areas, providing a 3D view of the depths of the earth with high resolution capability and penetration depth.

    Price on request

  • Remote static and dynamic monitoring with an accelerometer to reduce large external vibrations.

    Price on request

  • A towed ground radar solution for IDS vehicles, the Stream X unit covers a 2 m wide swath with one go.

    Price on request

  • Interferometric radar is used for bridges and other structures, including buildings, historical monuments and towers.

    Price on request

How to order 3Dscan.lv services?

To order survey work, laser scanning or geo-surveying, as well as technical inspection or other surveys at your sites, call our office:

+371 27 86 0000 or send an application to e-mail: info@3dscan.lv.

SV Solutions CONTACTS OF THE MAIN OFFICE.

UNIJAS STREET 15C, RIGA

UNIJAS STREET 15C, RIGA

Latvia, LV-1039

Latvia, LV-1039

I-V 09:00 – 18:00

I-V 09:00 – 18:00

VI-VII closed

VI-VII closed

Call us

Call us

+371 27 86 0000

+371 27 86 0000

Write to us

Write to us

info@3dscan.lv

info@3dscan.lv