329,00 

Cena norādīta bez PVN

RTK GNSS modules for UAV mapping

  • Positioning with centimeter accuracy RTK and PPK.
  • For accurate mapping of UAVs with a smaller number of GCPs.

REACH M+

  • Single-band
  • Baseline up to 20 km PPK

REACH M+

  • Multi-band
  • Baseline up to 100 km PPK

PPK mapping with centimeter accuracy. Use less GCP

Why is camera synchronization so important?
As a rule, autopilot starts the camera and records the coordinates that it has at that moment. When the drone flies at 20 m/s and the GPS runs at 5 Hz, it means that your autopilot will only have position readings every 4 m, which is not suitable for an accurate georeference. In addition, there is always a delay between the activator and the actual moment the photo was taken.

Reach eliminates delays
Reach solves the positioning problem by connecting directly to the camera port, which is synchronized with the shutter. The time and coordinates of each photo are recorded with a resolution of less than a microsecond. This method allows you to use GCP only to verify your accuracy.

NTRIP or other Reach as a base station
To calculate the exact coordinates of centimeters PPK and RTK, corrections from the base station are required in Reach. This could be another Reach receiver or NTRIP service. VRS is also supported.

Compatibility
Reach M2 and M+ work seamlessly with other Reach receivers via any link and are compatible with any other receiver that supports RTCM3 and NTRIP.

Reach M+
and Reach RS+

If you’re working on short baselines, Reach M+ is the optimal choice.

  • RTK Up to 10 km
  • PPK Up to 20 km
  • Time for correction 1-2 min
  • Frequency bands Single band

RINEX logging update speed
Up to 14 Hz

Reach M+ UAV Mapping Kit
Reach M+, Reach RS+ and GNSS antenna

Reach M2
and Reach RS2+

Provides strong performance and fast initialization, allowing you to work on long baselines.

  • RTK Up to 60 km
  • PPK Up to 100 km
  • Time to correct 5 sec
  • Multi-band

RINEX logging update speed
up to 10 Hz

Reach M2 UAV Mapping Kit
Reach M2, Reach RS2+ and GNSS antenna

How to order equipment or software?

To order equipment or software, as well as to receive detailed technical information about it, please call our office:

+371 27 86 0000 or send an application to e-mail: info@3dscan.lv.

We offer professional surveying works, laser scanning or geo-surveying, as well as technical inspection or other insemination of your objects.

SV Solutions CONTACTS OF THE MAIN OFFICE.

UNIJAS STREET 15C, RIGA

UNIJAS STREET 15C, RIGA

Latvia, LV-1039

Latvia, LV-1039

I-V 09:00 – 18:00

I-V 09:00 – 18:00

VI-VII closed

VI-VII closed

Call us

Call us

+371 27 86 0000

+371 27 86 0000

Write to us

Write to us

info@3dscan.lv

info@3dscan.lv